Sony Ericsson LiveView: How to Flash the Latest Firmware for Your Mw600
How To Update Sony Ericsson Mw600 Firmware
If you own a Sony Ericsson Mw600, you might be wondering how to update its firmware. Firmware is the software that controls the functions and features of your device. Updating the firmware can improve the performance, stability, and compatibility of your Mw600 with other devices. In this article, we will show you how to update the firmware of your Mw600 using a PC or a smartphone. We will also show you how to check the firmware version of your Mw600.
How To Update Sony Ericsson Mw600 Firmware
Introduction
What is Sony Ericsson Mw600?
Sony Ericsson Mw600 is a wireless stereo headset that lets you listen to music and make calls hands-free. It has a built-in FM radio, a 0.9-inch OLED display, and a touch-sensitive volume control. It also supports multipoint technology, which means you can connect it to two devices at the same time. You can pair it with any Bluetooth-enabled device, such as a smartphone, a tablet, or a laptop.
Why do you need to update the firmware?
Firmware is the software that controls the functions and features of your device. Updating the firmware can fix bugs, enhance features, and improve compatibility with other devices. For example, some users reported that their Mw600 had issues with volume control, battery life, and pairing with certain devices. Updating the firmware can solve these problems and make your Mw600 work better.
What are the benefits of updating the firmware?
Updating the firmware can bring you many benefits, such as:
Improved sound quality and noise cancellation
Improved battery life and charging speed
Improved Bluetooth connection and stability
Improved FM radio reception and tuning
Improved display brightness and contrast
New features and functions
How to update the firmware using a PC
If you want to update the firmware of your Mw600 using a PC, you will need a USB cable and the Sony Ericsson Update Service software. Here are the steps to follow:
Step 1: Download and install the Sony Ericsson Update Service software
The Sony Ericsson Update Service software is a tool that helps you update the firmware of your Sony Ericsson devices. You can download it from here. After downloading it, run it and follow the instructions to install it on your PC.
Step 2: Connect your Mw600 to your PC using a USB cable
Before connecting your Mw600 to your PC, make sure it is fully charged and turned off. Then, plug one end of the USB cable into your Mw600 and the other end into your PC. Wait for a few seconds until your PC recognizes your device.
Step 3: Follow the instructions on the screen to update the firmware
After connecting your Mw600 to your PC, launch the Sony Ericsson Update Service software. It will automatically detect your device and check for available updates. If there is an update available, it will prompt you to back up your data and proceed with the update. Follow the instructions on the screen to complete the update process. Do not disconnect or turn off your device until the update is finished.
How to update the firmware using a smartphone
If you want to update the firmware of your Mw600 using a smartphone, you will need a Bluetooth connection and the Sony Ericsson LiveView application. Here are the steps to follow:
Step 1: Download and install the Sony Ericsson LiveView application on your smartphone
The Sony Ericsson LiveView application is a tool that helps you manage your Mw600 from your smartphone. You can download it from here. After downloading it, run it and follow the instructions to install it on your smartphone.
Step 2: Pair your Mw600 with your smartphone via Bluetooth
Before pairing your Mw600 with your smartphone, make sure they are both turned on and within range. Then, go to Settings > Bluetooth on your smartphone and turn on Bluetooth. Your smartphone will scan for nearby devices and show them on a list. Select "MW600" from the list and enter "0000" as the passcode if prompted. Wait for a few seconds until they are paired successfully.
Step 3: Open the LiveView app and tap on Settings > Update Firmware
After pairing your Mw600 with your smartphone, open the LiveView app on your smartphone. Tap on Settings > Update Firmware. The app will automatically check for available updates for your device. If there is an update available, it will prompt you to proceed with the update. Follow the instructions on screen to complete the update process. Do not disconnect or turn off your device until the update is finished.
How to check the firmware version of your Mw600
If you want to check the firmware version of your Mw600, you can use one of the following methods:
Method 1: Using the Mw600 display
You can check the firmware version of your Mw600 by looking at its display. To do this, follow these steps:
Turn on your Mw600 by pressing and holding the power button for two seconds.
Press and hold the power button again for two seconds until you see "FW" on the display.
The display will show the firmware version number, such as "R1CA026".
To exit this mode, press any button or wait for ten seconds.
Method 2: Using the LiveView app
You can also check the firmware version of your Mw600 by using the LiveView app on your smartphone. To do this, follow these steps:
Pair your Mw600 with your smartphone via Bluetooth as described above.
Open the LiveView app on your smartphone.
Tap on Settings > About Device.
The app will show you the firmware version number, such as "R1CA026".
Conclusion
In this article, we have shown you how to update the firmware of your Sony Ericsson Mw600 using a PC or a smartphone. We have also shown you how to check the firmware version of your Mw600 using its display or the LiveView app. Updating the firmware can improve the performance, stability, and compatibility of your Mw600 with other devices. We hope this article was helpful for you. If you have any questions or feedback, please let us know in the comments below.
Frequently Asked Questions (FAQs)
How long does it take to update the firmware?
The time required to update the firmware depends on the size of the update file, the speed of your internet connection, and the battery level of your device. takes about 10 to 15 minutes to update the firmware.
How can I tell if the update was successful?
You can tell if the update was successful by checking the firmware version of your device as described above. If the firmware version matches the latest version available, then the update was successful.
What should I do if the update fails or gets interrupted?
If the update fails or gets interrupted, do not panic. You can try to update the firmware again by following the same steps as before. Make sure your device is fully charged and connected to a stable internet source. If the problem persists, you can contact Sony Ericsson customer support for assistance.
Will updating the firmware erase my data or settings?
No, updating the firmware will not erase your data or settings. However, it is always a good idea to back up your data before updating the firmware, just in case something goes wrong.
Can I downgrade the firmware to an older version?
No, you cannot downgrade the firmware to an older version. Once you update the firmware, you cannot revert back to a previous version. Therefore, you should only update the firmware if you are sure you want to.